dmesg - nuc x264

Return To nuc x264 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-44-generic (buildd@lamiak) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 (Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a9e76fff] usable
BIOS-e820: [mem 0x00000000a9e77000-0x00000000a9e7dfff] ACPI NVS
BIOS-e820: [mem 0x00000000a9e7e000-0x00000000bda71fff] usable
BIOS-e820: [mem 0x00000000bda72000-0x00000000bdb09fff] reserved
BIOS-e820: [mem 0x00000000bdb0a000-0x00000000bdb23fff] ACPI data
BIOS-e820: [mem 0x00000000bdb24000-0x00000000bdc8cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bdc8d000-0x00000000bdf6bfff] reserved
BIOS-e820: [mem 0x00000000bdf6c000-0x00000000bdffefff] type 20
BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000bf000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI 2.0=0xbdb0f000  ACPI=0xbdb0f000  SMBIOS=0xf04d0  MPS=0xfd530 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000058000) (0MB)
efi: mem02: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
efi: mem03: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
efi: mem04: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
efi: mem05: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem06: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001503000) (20MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000001503000-0x0000000002000000) (10MB)
efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003403000) (20MB)
efi: mem10: type=7, attr=0xf, range=[0x0000000003403000-0x0000000034b2c000) (791MB)
efi: mem11: type=2, attr=0xf, range=[0x0000000034b2c000-0x000000003658e000) (26MB)
efi: mem12: type=7, attr=0xf, range=[0x000000003658e000-0x000000006f8cf000) (915MB)
efi: mem13: type=2, attr=0xf, range=[0x000000006f8cf000-0x000000009b443000) (699MB)
efi: mem14: type=7, attr=0xf, range=[0x000000009b443000-0x00000000a9b6f000) (231MB)
efi: mem15: type=2, attr=0xf, range=[0x00000000a9b6f000-0x00000000a9d43000) (1MB)
efi: mem16: type=1, attr=0xf, range=[0x00000000a9d43000-0x00000000a9e77000) (1MB)
efi: mem17: type=10, attr=0xf, range=[0x00000000a9e77000-0x00000000a9e7e000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000a9e7e000-0x00000000aa533000) (6MB)
efi: mem19: type=3, attr=0xf, range=[0x00000000aa533000-0x00000000ab2f0000) (13MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000ab2f0000-0x00000000ab308000) (0MB)
efi: mem21: type=3, attr=0xf, range=[0x00000000ab308000-0x00000000ab31a000) (0MB)
efi: mem22: type=4, attr=0xf, range=[0x00000000ab31a000-0x00000000ab333000) (0MB)
efi: mem23: type=7, attr=0xf, range=[0x00000000ab333000-0x00000000ab340000) (0MB)
efi: mem24: type=2, attr=0xf, range=[0x00000000ab340000-0x00000000ab342000) (0MB)
efi: mem25: type=7, attr=0xf, range=[0x00000000ab342000-0x00000000aee13000) (58MB)
efi: mem26: type=4, attr=0xf, range=[0x00000000aee13000-0x00000000af5fd000) (7MB)
efi: mem27: type=7, attr=0xf, range=[0x00000000af5fd000-0x00000000af604000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000af604000-0x00000000af60f000) (0MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000af60f000-0x00000000af616000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000af616000-0x00000000af61a000) (0MB)
efi: mem31: type=7, attr=0xf, range=[0x00000000af61a000-0x00000000af7c9000) (1MB)
efi: mem32: type=4, attr=0xf, range=[0x00000000af7c9000-0x00000000af806000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x00000000af806000-0x00000000af80b000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000af80b000-0x00000000af87c000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x00000000af87c000-0x00000000af884000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000af884000-0x00000000afb30000) (2MB)
efi: mem37: type=7, attr=0xf, range=[0x00000000afb30000-0x00000000afb34000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000afb34000-0x00000000afb3a000) (0MB)
efi: mem39: type=7, attr=0xf, range=[0x00000000afb3a000-0x00000000afb40000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000afb40000-0x00000000afb4a000) (0MB)
efi: mem41: type=7, attr=0xf, range=[0x00000000afb4a000-0x00000000afb4e000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000afb4e000-0x00000000afb5d000) (0MB)
efi: mem43: type=7, attr=0xf, range=[0x00000000afb5d000-0x00000000afb5f000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000afb5f000-0x00000000afb9d000) (0MB)
efi: mem45: type=7, attr=0xf, range=[0x00000000afb9d000-0x00000000afba6000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000afba6000-0x00000000afba7000) (0MB)
efi: mem47: type=7, attr=0xf, range=[0x00000000afba7000-0x00000000afba8000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x00000000afba8000-0x00000000afbae000) (0MB)
efi: mem49: type=7, attr=0xf, range=[0x00000000afbae000-0x00000000afbb5000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x00000000afbb5000-0x00000000afbb6000) (0MB)
efi: mem51: type=7, attr=0xf, range=[0x00000000afbb6000-0x00000000afbb7000) (0MB)
efi: mem52: type=4, attr=0xf, range=[0x00000000afbb7000-0x00000000afbb8000) (0MB)
efi: mem53: type=7, attr=0xf, range=[0x00000000afbb8000-0x00000000afbc1000) (0MB)
efi: mem54: type=4, attr=0xf, range=[0x00000000afbc1000-0x00000000afbc2000) (0MB)
efi: mem55: type=7, attr=0xf, range=[0x00000000afbc2000-0x00000000afbc3000) (0MB)
efi: mem56: type=4, attr=0xf, range=[0x00000000afbc3000-0x00000000afbc4000) (0MB)
efi: mem57: type=7, attr=0xf, range=[0x00000000afbc4000-0x00000000afbd2000) (0MB)
efi: mem58: type=4, attr=0xf, range=[0x00000000afbd2000-0x00000000afbe2000) (0MB)
efi: mem59: type=7, attr=0xf, range=[0x00000000afbe2000-0x00000000afbeb000) (0MB)
efi: mem60: type=4, attr=0xf, range=[0x00000000afbeb000-0x00000000afbf1000) (0MB)
efi: mem61: type=7, attr=0xf, range=[0x00000000afbf1000-0x00000000afbf2000) (0MB)
efi: mem62: type=4, attr=0xf, range=[0x00000000afbf2000-0x00000000afbf3000) (0MB)
efi: mem63: type=7, attr=0xf, range=[0x00000000afbf3000-0x00000000afbf4000) (0MB)
efi: mem64: type=4, attr=0xf, range=[0x00000000afbf4000-0x00000000afbff000) (0MB)
efi: mem65: type=7, attr=0xf, range=[0x00000000afbff000-0x00000000afc06000) (0MB)
efi: mem66: type=4, attr=0xf, range=[0x00000000afc06000-0x00000000bbfa1000) (195MB)
efi: mem67: type=7, attr=0xf, range=[0x00000000bbfa1000-0x00000000bd308000) (19MB)
efi: mem68: type=2, attr=0xf, range=[0x00000000bd308000-0x00000000bd314000) (0MB)
efi: mem69: type=3, attr=0xf, range=[0x00000000bd314000-0x00000000bda72000) (7MB)
efi: mem70: type=0, attr=0xf, range=[0x00000000bda72000-0x00000000bda92000) (0MB)
efi: mem71: type=0, attr=0xf, range=[0x00000000bda92000-0x00000000bdb0a000) (0MB)
efi: mem72: type=9, attr=0xf, range=[0x00000000bdb0a000-0x00000000bdb0f000) (0MB)
efi: mem73: type=9, attr=0xf, range=[0x00000000bdb0f000-0x00000000bdb24000) (0MB)
efi: mem74: type=10, attr=0xf, range=[0x00000000bdb24000-0x00000000bdb7e000) (0MB)
efi: mem75: type=10, attr=0xf, range=[0x00000000bdb7e000-0x00000000bdc8d000) (1MB)
efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000bdc8d000-0x00000000bdd20000) (0MB)
efi: mem77: type=6, attr=0x800000000000000f, range=[0x00000000bdd20000-0x00000000bdece000) (1MB)
efi: mem78: type=6, attr=0x800000000000000f, range=[0x00000000bdece000-0x00000000bded0000) (0MB)
efi: mem79: type=6, attr=0x800000000000000f, range=[0x00000000bded0000-0x00000000bdf6c000) (0MB)
efi: mem80: type=5, attr=0x800000000000000f, range=[0x00000000bdf6c000-0x00000000bdf89000) (0MB)
efi: mem81: type=5, attr=0x800000000000000f, range=[0x00000000bdf89000-0x00000000bdfff000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x00000000bdfff000-0x00000000be000000) (0MB)
efi: mem83: type=7, attr=0xf, range=[0x0000000100000000-0x000000011fe00000) (510MB)
efi: mem84: type=0, attr=0x0, range=[0x00000000bf000000-0x00000000df200000) (514MB)
efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI:                  /D54250WYK, BIOS WYLPT10H.86A.0027.2014.0710.1904 07/10/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F00000000 write-back
  1 base 0100000000 mask 7FE0000000 write-back
  2 base 00C0000000 mask 7FC0000000 uncachable
  3 base 00BF000000 mask 7FFF000000 uncachable
  4 base 011FE00000 mask 7FFFE00000 uncachable
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 512MB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3056MB, range: 16MB, type UC
reg 4, base: 4606MB, range: 2MB, type UC
total RAM covered: 3566M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 32M 	num_reg: 5  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3056MB, range: 16MB, type UC
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4606MB, range: 2MB, type UC
e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x02fe1000, 0x02fe1fff] PGTABLE
BRK [0x02fe2000, 0x02fe2fff] PGTABLE
BRK [0x02fe3000, 0x02fe3fff] PGTABLE
init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
 [mem 0x11fc00000-0x11fdfffff] page 2M
BRK [0x02fe4000, 0x02fe4fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
 [mem 0x11c000000-0x11fbfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
 [mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xa9e76fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0xa9dfffff] page 2M
 [mem 0xa9e00000-0xa9e76fff] page 4k
init_memory_mapping: [mem 0xa9e7e000-0xbda71fff]
 [mem 0xa9e7e000-0xa9ffffff] page 4k
 [mem 0xaa000000-0xbd9fffff] page 2M
 [mem 0xbda00000-0xbda71fff] page 4k
BRK [0x02fe5000, 0x02fe5fff] PGTABLE
init_memory_mapping: [mem 0xbdfff000-0xbdffffff]
 [mem 0xbdfff000-0xbdffffff] page 4k
BRK [0x02fe6000, 0x02fe6fff] PGTABLE
RAMDISK: [mem 0x34b2c000-0x3658dfff]
ACPI: RSDP 00000000bdb0f000 000024 (v02  INTEL)
ACPI: XSDT 00000000bdb0f088 000094 (v01 INTEL  D54250WY 0000001B AMI  00010013)
ACPI: FACP 00000000bdb1e9b8 00010C (v05 INTEL  D54250WY 0000001B AMI  00010013)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
ACPI: DSDT 00000000bdb0f1b0 00F803 (v02 INTEL  D54250WY 0000001B INTL 20120711)
ACPI: FACS 00000000bdc8cf80 000040
ACPI: APIC 00000000bdb1eac8 000072 (v03 INTEL  D54250WY 0000001B AMI  00010013)
ACPI: FPDT 00000000bdb1eb40 000044 (v01 INTEL  D54250WY 0000001B AMI  00010013)
ACPI: FIDT 00000000bdb1eb88 00009C (v01 INTEL  D54250WY 0000001B AMI  00010013)
ACPI: SSDT 00000000bdb1ec28 00045E (v01 INTEL  D54250WY 0000001B INTL 20120711)
ACPI: SSDT 00000000bdb1f088 0004F7 (v01 INTEL  D54250WY 0000001B INTL 20120711)
ACPI: SSDT 00000000bdb1f580 000AD8 (v01 INTEL  D54250WY 0000001B INTL 20120711)
ACPI: MCFG 00000000bdb20058 00003C (v01 INTEL  D54250WY 0000001B MSFT 00000097)
ACPI: HPET 00000000bdb20098 000038 (v01 INTEL  D54250WY 0000001B AMI. 00000005)
ACPI: SSDT 00000000bdb200d0 000315 (v01 INTEL  D54250WY 0000001B INTL 20120711)
ACPI: SSDT 00000000bdb203e8 0030DF (v01 INTEL  D54250WY 0000001B INTL 20091112)
ACPI: BGRT 00000000bdb234c8 000038 (v00 INTEL  D54250WY 0000001B AMI  00010013)
ACPI: DMAR 00000000bdb23500 0001AC (v01 INTEL  D54250WY 0000001B INTL 00000001)
ACPI: CSRT 00000000bdb236b0 0000C4 (v01 INTEL  D54250WY 0000001B INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
  NODE_DATA [mem 0x11fdf9000-0x11fdfdfff]
 [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011bc00000-ffff88011f3fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x11fdfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00057fff]
  node   0: [mem 0x00059000-0x0009efff]
  node   0: [mem 0x00100000-0xa9e76fff]
  node   0: [mem 0xa9e7e000-0xbda71fff]
  node   0: [mem 0xbdfff000-0xbdffffff]
  node   0: [mem 0x100000000-0x11fdfffff]
On node 0 totalpages: 907273
  DMA zone: 64 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 12074 pages used for memmap
  DMA32 zone: 772716 pages, LIFO batch:31
  Normal zone: 2040 pages used for memmap
  Normal zone: 130560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xa9e77000-0xa9e7dfff]
PM: Registered nosave memory: [mem 0xbda72000-0xbdb09fff]
PM: Registered nosave memory: [mem 0xbdb0a000-0xbdb23fff]
PM: Registered nosave memory: [mem 0xbdb24000-0xbdc8cfff]
PM: Registered nosave memory: [mem 0xbdc8d000-0xbdf6bfff]
PM: Registered nosave memory: [mem 0xbdf6c000-0xbdffefff]
PM: Registered nosave memory: [mem 0xbe000000-0xbeffffff]
PM: Registered nosave memory: [mem 0xbf000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s82304 r8192 d24192 u524288
pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 893069
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3220364K/3629092K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 408728K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:984 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1895.696 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.39 BogoMIPS (lpj=7582784)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28554 entries in 112 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000bdeb2000 end: 0x000000bdec0fff
dmar: RMRR base: 0x000000bf000000 end: 0x000000df1fffff
dmar: Unknown DMAR structure type 4
dmar: Unknown DMAR structure type 4
dmar: Unknown DMAR structure type 4
dmar: Unknown DMAR structure type 4
dmar: Unknown DMAR structure type 4
dmar: Unknown DMAR structure type 4
dmar: Unknown DMAR structure type 4
IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4250U CPU @ 1.30GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15165.56 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xa9e77000-0xa9e7dfff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbdb24000-0xbdc8cfff] (1478656 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:21:18, date: 01/24/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdafec18 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000bdafe618 0005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000bdafdd98 000119 (v01  PmRef    ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a26] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7c3e000-0xf7c3e01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7c3c000-0xf7c3cfff]
pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xa9e77000-0xabffffff]
e820: reserve RAM buffer [mem 0xbda72000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io  0x0680-0x069f] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0x1c00-0x1cfe] has been reserved
system 00:04: [io  0x1d00-0x1dfe] has been reserved
system 00:04: [io  0x1e00-0x1efe] has been reserved
system 00:04: [io  0x1f00-0x1ffe] has been reserved
system 00:04: [io  0x1800-0x18fe] could not be reserved
system 00:04: [io  0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io  0x0a00-0x0a1f] has been reserved
system 00:07: [io  0x0a00-0x0a0f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs NTN0530 (active)
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:0a: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:0a: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:0a: [mem 0xfe108000-0xfe108fff] has been reserved
system 00:0a: [mem 0xfe10a000-0xfe10afff] has been reserved
system 00:0a: [mem 0xfe10c000-0xfe10cfff] has been reserved
system 00:0a: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:0a: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:0a: [mem 0xfe111000-0xfe111007] has been reserved
system 00:0a: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0b: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27016K (ffff880034b2c000 - ffff88003658e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa5e77000-0xa9e77000] (64MB) mapped at [ffff8800a5e77000-ffff8800a9e76fff]
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x18
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x18
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x18
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x18
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1422123678.612:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 6813
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-44-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-44-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 1895.614 MHz
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 508c3b4bf108ed36b6062f812782f77c37b98537'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 15:504:393
thermal cooling_device8: hash matches
rtc_cmos 00:05: setting system clock to 2015-01-24 18:21:19 UTC (1422123679)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 796K (ffff880002739000 - ffff880002800000)
Freeing unused kernel memory: 688K (ffff880002b54000 - ffff880002c00000)
systemd-udevd[115]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[drm] Initialized drm 1.1.0 20060810
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 59 for MSI/MSI-X
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 59
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 60 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c0:3f:d5:61:df:1a
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
systemd-udevd[121]: renamed network interface eth0 to em1
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
i915 0000:00:02.0: irq 61 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: ATA-9: Samsung SSD 840 EVO 120GB mSATA, EXT42B6Q, max UDMA/133
ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      Samsung SSD 840  EXT4 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 3:0:0:0: [sda] Attached SCSI disk
usb 2-4: new high-speed USB device number 3 using xhci_hcd
usb 2-4: New USB device found, idVendor=2109, idProduct=2812
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB2.0 Hub             
usb 2-4: Manufacturer: VIA Labs, Inc.         
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:46: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
traps: v86d[149] general protection ip:7fec2f306744 sp:7fff8e0835e8 error:0 in libc.so.6[7fec2f27d000+1bb000]
Switched to clocksource tsc
usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=174c, idProduct=55aa
usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-3: Product: External HDD
usb 3-3: Manufacturer: 01234567890123456789012345678901234567890123
usb 3-3: SerialNumber: 20130807001A
usb-storage 3-3:1.0: USB Mass Storage device detected
usb-storage 3-3:1.0: Quirks match for vid 174c pid 55aa: 400000
scsi4 : usb-storage 3-3:1.0
usbcore: registered new interface driver usb-storage
usb 3-4: new SuperSpeed USB device number 3 using xhci_hcd
usb 3-4: New USB device found, idVendor=2109, idProduct=0812
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: USB3.0 Hub             
usb 3-4: Manufacturer: VIA Labs, Inc.         
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 4 ports detected
usb 2-4.2: new high-speed USB device number 4 using xhci_hcd
usb 2-4.2: New USB device found, idVendor=13fd, idProduct=1e40
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: HD204UI         
usb 2-4.2: Manufacturer: DMI     
usb 2-4.2: SerialNumber: 0010101E4020412F
usb-storage 2-4.2:1.0: USB Mass Storage device detected
scsi5 : usb-storage 2-4.2:1.0
usb 2-4.3: new full-speed USB device number 5 using xhci_hcd
usb 2-4.3: New USB device found, idVendor=045e, idProduct=0719
usb 2-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.3: Product: Xbox 360 Wireless Receiver for Windows
usb 2-4.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft
usb 2-4.3: SerialNumber: FF4DDDA0
scsi 4:0:0:0: Direct-Access     WDC WD40 EZRX-00SPEB0     80.0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB)
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
[drm:hsw_unclaimed_reg_clear] *ERROR* Unknown unclaimed register before writing to a094
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
scsi 5:0:0:0: Direct-Access     DMI      HD204UI          1.06 PQ: 0 ANSI: 4
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdc] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 26 00 00
sd 5:0:0:0: [sdc] No Caching mode page found
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sd 5:0:0:0: [sdc] No Caching mode page found
sd 5:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 5:0:0:0: [sdc] No Caching mode page found
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sd 5:0:0:0: [sdc] Attached SCSI disk
uvesafb: Getting VBE info block failed (eax=0x4f00, err=1)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 94 bits of entropy available
Adding 3629052k swap on /dev/sda3.  Priority:-1 extents:1 across:3629052k SSFS
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
init: bootchart main process (335) terminated with status 127
systemd-udevd[360]: starting version 204
 sdb: sdb1
sdb: p1 size 28152558472 extends beyond EOD, enabling native capacity
sd 4:0:0:0: [sdb] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB)
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sdb: p1 size 28152558472 extends beyond EOD, truncated
sd 4:0:0:0: [sdb] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB)
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI disk
nct6775: Found NCT6776D/F or compatible chip at 0x4e:0xa00
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
Registered IR keymap rc-rc6-mce
input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:08/rc/rc0/input3
rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:08/rc/rc0
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
init: bootchart post-stop process (354) terminated with status 127
IR JVC protocol handler initialized
IR RC6 protocol handler initialized
nuvoton_cir: driver has been successfully loaded
IR SANYO protocol handler initialized
IR Sony protocol handler initialized
input: MCE IR Keyboard/Mouse (nuvoton-cir) as /devices/virtual/input/input4
IR MCE Keyboard/mouse protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 249 
rc rc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0
IR LIRC bridge handler initialized
e1000e 0000:00:19.0: irq 60 for MSI/MSI-X
e1000e 0000:00:19.0: irq 60 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5
SKU: Nid=0x1d sku_cfg=0x40941905
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000004
SKU: customization=0x00000019
SKU: external_amp=0x0
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   inputs:
     Mic=0x19
realtek: No valid SSID, checking pincfg 0x40941905 for NID 0x1d
realtek: Enabling init ASM_ID=0x1905 CODEC_ID=10ec0283
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
intel_rapl: domain uncore energy ctr 18554:18554 not working, skip
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: idmapd-mounting (/media/640GB) main process (741) killed by TERM signal
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
init: failsafe main process (769) killed by TERM signal
init: alsa-restore main process (1178) terminated with status 127
usbcore: registered new interface driver mceusb
init: plymouth-upstart-bridge main process ended, respawning
init: xbmc main process (953) terminated with status 1
init: xbmc main process ended, respawning
ahci 0000:00:1f.2: port does not support device sleep
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Raw EDID:
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid.
hda-intel 0000:00:03.0: Unstable LPIB (38396 >= 9600); disabling LPIB delay counting

Return To nuc x264 System Information